Iota Silicone Oil (Anhui) Co., Ltd
Classification of anti-graffiti coating: Most of the domestic market is permanent anti-graffiti and anti-stick coating. According to its chemical composition, it is mainly divided into f......
2024-06-20Anti-graffiti coating is a coating with special surface functions. The surface has low surface tension. The lotus leaf-shaped surface has a self-cleaning effect. Dirt rolls off naturally. The self-a......
2024-06-19Our company used phenyltrimethoxysilane, methylphenyldiethoxysilane, and methylvinyldimethoxysilane as raw materials and organic acid as catalyst to synthesize vinyl phenyl silicone resin. The obta......
2024-06-18Zhang Wenfei et al. modified nano zinc oxide with N-(trimethoxysilylpropyl)-4-azido-2,3,5,6-tetrafluorobenzamide and grafted it onto the organosilicon polymer chain. The grafting reaction changed t......
2024-06-17Ding Xiaowei et al. obtained a phenyl-containing hydrogen-based silicone resin by first hydrolyzing alkoxysilane to prepare a prepolymer, and then condensing it with hydrogen-containing alkoxysilan......
2024-06-14Yang Huan, Yang Gang, and Gao Qun used hydrolysis and condensation to obtain phenyl silicone resin: phenyltrimethoxysilane, diphenyldimethoxysilane, and vinyltrimethoxysilane were selected as raw m......
2024-06-13Currently, there are many patents on LED packaging materials, and phenyl packaging materials have been the most studied. Zhang Wei et al. used tetraphenylcyclotetrasiloxane and vinyl double h......
2024-06-123. Advantages of silicone coating spraying process 1)Silicone coating has excellent weather resistance and corrosion resistance, and can maintain the stability and appearance quality of th......
2024-06-114). Check and treat the coating in time after spraying. When problems are found in the coating, it should be repaired or re-sprayed in time to avoid failure of the coating or affect its service ......
2024-06-062. Key points of spraying process 1). Ensure the quality of surface treatment, including steps such as cleaning, rust removal and polishing. Surface treatment can not only improve the adhes......
2024-06-051. Definition of spraying: Spraying is a coating method that uses a spray gun or a disc atomizer to disperse into uniform and fine droplets with the help of pressure or centrifugal force an......
2024-06-04(3) Alkali dissolution method: Alkali dissolution method is a method that uses strong alkaline substances such as sodium hydroxide, potassium hydroxide, etc. to react with silicon atoms in silic......
2024-06-03(2) Curing agent method: For some silicone resins that are insoluble in common solvents, specific curing agents can be used to dissolve them. Curing agents can decompose and dissolve the resin by......
2024-05-312、chemical method (1) Solvent method: The solvent method is one of the most commonly used methods to dissolve silicone resin. Commonly used solvents include benzene, toluene, acetone, ethyl......
2024-05-30(2) Stirring: Stirring can increase the contact area between the silicone resin and the solvent, allowing it to dissolve faster. The faster you stir, the faster it dissolves. However, too fast a......
2024-05-29
