Iota Silicone Oil (Anhui) Co., Ltd
3. Advantages of silicone coating spraying process 1)Silicone coating has excellent weather resistance and corrosion resistance, and can maintain the stability and appearance quality of th......
2024-06-114). Check and treat the coating in time after spraying. When problems are found in the coating, it should be repaired or re-sprayed in time to avoid failure of the coating or affect its service ......
2024-06-062. Key points of spraying process 1). Ensure the quality of surface treatment, including steps such as cleaning, rust removal and polishing. Surface treatment can not only improve the adhes......
2024-06-051. Definition of spraying: Spraying is a coating method that uses a spray gun or a disc atomizer to disperse into uniform and fine droplets with the help of pressure or centrifugal force an......
2024-06-04(3) Alkali dissolution method: Alkali dissolution method is a method that uses strong alkaline substances such as sodium hydroxide, potassium hydroxide, etc. to react with silicon atoms in silic......
2024-06-03(2) Curing agent method: For some silicone resins that are insoluble in common solvents, specific curing agents can be used to dissolve them. Curing agents can decompose and dissolve the resin by......
2024-05-312、chemical method (1) Solvent method: The solvent method is one of the most commonly used methods to dissolve silicone resin. Commonly used solvents include benzene, toluene, acetone, ethyl......
2024-05-30(2) Stirring: Stirring can increase the contact area between the silicone resin and the solvent, allowing it to dissolve faster. The faster you stir, the faster it dissolves. However, too fast a......
2024-05-291. Physical methods (1) Heating: Heating can reduce the viscosity of silicone resin, making it easier to dissolve. Generally, the higher the heating temperature, the faster the silicone res......
2024-05-28Silicone resin (also known as polysiloxane) is a general term for a polymer that consists of silicon atoms and oxygen atoms alternately linked to form a skeleton, and different organic groups are link......
2024-05-272、Nanoparticle modified silicone resin Dispersing nanoscale filler particles in the chain segments of the silicone polymer through a high-speed mixer can improve the compatibility with the silic......
2024-05-231、Polymer modified silicone resin Unlike silicone antifouling coatings, other polymer-based antifouling coatings also have unique antifouling properties. Therefore, the polysiloxane resin can re......
2024-05-22The excellent antifouling properties of silicone resin also depend on its unique chemical structure. Silicone resin contains a large number of silanol groups. During the film formation process, ......
2024-05-21Silicone resin has exceptional UV resistance and can be used in high-energy lighting, instrumentation and solar installations. During the 1950s and 1960s, much research was done on artificial he......
2024-05-20Silicone's electrical insulation properties are close to those of glass, so it's also perfect for use in electronics. In addition, special ozone and corona resistance enable it to be used for hi......
2024-05-17
