As a new generation of green and environmentally friendly coatings, flexible silicone heavy anti-corrosion coatings are shining in many fields with their excellent performance.
From the product description, it has a wide range of applications, whether it is high-speed railway station steel structure, factory building steel structure, bridge, storage tank, pipeline and other steel and plastic pipes, or petrochemical plant pipelines, storage tanks and other metal surface corrosion protection, it can easily do it. At the same time, it also has outstanding performance in waterproofing, corrosion prevention, and freeze-thaw protection of concrete structures such as railways and buildings.
Its product characteristics are very outstanding. It is not only resistant to acid and alkali corrosion, but also can not be powdered, cracked, peeled, or shed. It can also adapt to the high and low temperature climate environment of -40~200℃. In addition, it is energy-saving and environmentally friendly, heat-insulating and heat-insulating, has strong adhesion, and provides long-lasting and effective protection for the substrate. The bottom and surface are integrated, so it has low requirements for substrate surface treatment, and St2 level is sufficient. The validity period can be up to 15 years according to user requirements.
In terms of product technical indicators, each performance is excellent. The appearance is a uniform viscous body without gel and agglomeration. The surface drying time does not exceed 2 hours, the actual drying time does not exceed 24 hours, and the solid content is high. There are strict and excellent standards in terms of impermeability, tensile strength, elongation at break, adhesion, etc. After heat treatment, acid and alkali treatment, artificial weather aging, salt spray resistance, impact resistance, wear resistance, and film flexibility, it can maintain good performance.
In terms of usage, the construction site needs to be rusted, deslagging, and dusted before construction. A roller or airless sprayer can be used during construction. If there is solidified paint on the barrel wall that needs to be cleaned, a thinner of no more than 5% can be added when the viscosity is too high. The secondary construction can be carried out 6 hours after the initial construction, and the thickness of the initial construction shall not exceed 1mm. After the construction is completed, it should be sealed and stored in time.